The difference in mold remediation.
Fresno Pure Maintenance is part of a national network using the same patented dry-fog process that has remediated mold in tens of thousands of homes, schools, hospitals, and government buildings since 2007. We brought it home to the Central Valley.
Patented VaPure Dry-Fog Technology
The same patented dry-fog process used by Pure Maintenance globally — now serving Fresno and Clovis homes. We don't replace harmful mold with harmful chemicals. Our sterilant is professional-grade and safe for families and pets when used as directed.
1-Day Mold Remediation
Setup, two-stage treatment, and clearance ventilation typically wrap inside a single day — most families are back home by dinner.
No Demolition, No Tear-Outs
Our 7-micron dry fog penetrates porous materials and cavities, so walls, ceilings, and finishes stay intact in nearly every job.
Professional-Grade Sterilant
Hospital-grade sterilant that breaks down into water and oxygen. Safe around kids, pets, electronics, books, and soft furnishings.
Reaches Where Traditional Methods Can't
Fills the full volume of the structure — HVAC ducts, attic insulation, behind drywall, inside cabinets, and under sinks.
| VaPure Dry-Fog | Traditional Tear-Out | |
|---|---|---|
| Time on site | 1 day | 1–3 weeks |
| Demolition | None in most jobs | Drywall, flooring, framing |
| Re-entry | Same evening | After full reconstruction |
| HVAC + soft goods | Treated in place | Often missed |
| Kids & pets safe | Yes — professional-grade sterilant | Heavy biocides + dust |
| Typical total cost | $1.5K – $4.5K | $10K – $30K+ |
Two-stage process: a sterilant fog neutralizes mold spores on contact, then a second antimicrobial fog leaves a protective barrier that resists regrowth — without residue, smell, or stains.
A sterilant fog, then a protective fog.
Mold isn't just on the surface — spores travel into wall cavities, HVAC ducts, attic insulation, and the porous fibers of soft goods. A surface scrub can't reach them. A 7-micron dry fog can.
Stage 1 — Sterilant fog
A professional-grade sterilant is atomized into a 7-micron dry fog that fills the entire volume of the structure. The droplets are small enough to move like a gas — through cracks, into ductwork, behind drywall, into cabinets — and neutralize mold spores on contact. The active ingredient breaks down into water and oxygen, leaving no residue.
Stage 2 — Protective fog
A second antimicrobial fog lays down an invisible, bonded barrier on every treated surface. New spores that land are denied a foothold, so mold can't re-establish on the same surfaces that were just cleaned. The result is a home that's not only treated — it's protected going forward.
Built for the parts of your home you can't scrub.
Particle size matters
At ~7 microns, droplets behave like a gas, not a mist. They penetrate porous surfaces and follow airflow into hidden cavities.
Dwell time matters
The treatment is held inside the sealed structure long enough to ensure sporicidal contact in the spaces a tech can never physically reach.
Chemistry matters
Vapor peracetic acid is one of the few sterilants validated to sanitize mold spores at room temperature — and to break down cleanly afterward.
Breathe easier this week.
Free, no-pressure inspection. Most homes treated within 5 business days.
Tell us about your home.
Send your name and phone and we'll reach out the same business day to schedule your free inspection.
- Phone
- (559) 999-4852
- Hours
- Mon–Sat · 7am – 7pm